Grounds your un-grounded throttle body with the minimum resistance. 

You can read the 40+ pages of the throttle body grounding thread at the mazda3forums for all the "Pros".

Terminations use electro-Gold plated ring terminals that resists corrosion and will not flake apart like cheaper terminals.  Each connection is crimped with a commercial ratcheting crimping tool.

1.25" of Heat shrink tubing protects each end and our tubing is medium wall thickness lined with a thermoplastic adhesive.  The result is a waterproof connection that has strain relief and adds abrasion protection.

Our wire is manufactured by Phoenix Gold and is a TRUE 8GA unlike some offshore wires some of our competitors use.  There are over 700 strands of copper coated in protective tin that comprise our wire along with a translucent jacket that is gas, oil, and high temperature resistant.  This combination is flexible yet not like a limp noodle to get caught or snagged in places like some wires.

What makes our wires truly unique is the flame resistant sleeve surrounding our wire that has the diamond tracers.  This has excellent cut through and abrasion resistance which is IDEAL for any engine bay.  To top that off it conforms to FMVSS 302 - Automotive Burn Test, passes FAR Part 25 flame test, and is UL and CSA registered to meet VW-1 and FT-1 flame tests.  The sleeve itself is registered in NASA for low outgassing and resists chemicals and cleaning solvents with a melting temp of 445 deg F.

Grounding point locations are flexible to users preference and can be at either bolt on the throttle body and the negative battery terminal.  The wire was given enough slack to allow full range of engine movement so no strain is put on our wire.  Detailed Instructions included along with RE-USABLE cable ties for a secure installation.